Description
120W Replacement LED Driver | 90-130VDC Output | 0.88-0.98A | 277-480VAC | 12V Auxiliary
The KHM-HNISG150W43S-930 is a 120W constant current LED driver designed for high-voltage North American installations. Operating on 277-480VAC input, this driver delivers a 90-130VDC output range with adjustable current from 0.88A to 0.98A. An isolated 12V auxiliary output (12VDC / 0.1A) supports compatible sensors or control accessories. Built-in protections include short circuit and over-temperature safeguards, along with 6kV surge protection (DM and CM) for enhanced durability in demanding environments.
Electrical Specifications
- Model: KHM-HNISG150W43S-930
- Driver Type: Constant Current
- Maximum Output Power: 120W
- Output Voltage Range: 90-130VDC
- Output Current: 0.88-0.98A
- Input Voltage Range: 277-480VAC
- Input Frequency: 50/60Hz (47-63Hz range)
- Maximum Input Current: 0.6A
- Maximum Input Power: 161W
- Power Factor (Typical): 0.95
- THD (Max): <13%
- Efficiency (Typical): 93%
- Standby Power: <0.5W
Protection & Auxiliary Output
- Surge Protection: 6kV DM, 6kV CM
- Auxiliary Output: 12VDC / 0.1A (Isolated)
- Short Circuit Protection
- Over-Temperature Protection
- Maximum Shell Temperature: 90°C
Environmental Specifications
- Operating Temperature (Tcase): -40°C to +50°C
- Storage Temperature: -40°C to +80°C
Compliance
- Safety: UL 8750
- EMC: FCC Part 15 Subpart B Class B
- Warranty: 5 Years
Physical Dimensions
- Length: 6.68 inches
- Width: 2.52 inches
- Height: 1.57 inches
Applications
- Industrial and mining fixtures
- Plant and grow lighting systems
- High-voltage commercial LED luminaires
Downloads
Non-Returnable Item Notice:
Due to the sensitive electronic nature of LED drivers and the risk of improper installation, tampering, or programming, this item is non-returnable. Please confirm compatibility before purchasing. If your LED driver is defective upon arrival or during the warranty period, it may be eligible for a manufacturer warranty replacement. For assistance selecting the correct driver, please contact our support team.
